1 The “HP(高壓)-sealing” Warning is an option. The appearance of this failure message normallyallows the finishing of the running job in a short time. After the replacement of the high pressure seals the alarm has to be reset.2 Normally supplied dry in bags, therefore store in dry conditions3 Garnet Product Information4 Pressure compensated variable delivery axial piston pump with Cetop 3 valve interface5 Two single powered intensifiers6 Every 500 operating hours or at a drop of 1bar after all 3 stages while pumping water7 The measuring point is after the 3-stage fine filtration8 Turn on the mains water at supply, check that the stopcock at the intensifier is openand turn on the compressed air supply for the pump